Power Trowel Float Pan / Power Trowel Blade/ Float Blade

Float Pans
Super float 1/8" float Float 3/8" float

Edger Pan
90 degree folded lip for a closer finish from wall

Plastic Pan
Size: 24", 30", 36 1/2", 45 3/4"(4 blades), 45 3/4"(5 blades), 45 1/2"(4 blades), 48 1/2"(5 blades)

Float Clip-On Blades
9"x14"(23x36cm) 10"x131/4"(25x33.6cm) 10"x14"x12ga(25x36cm) 10"x 18"x11ga(25x46cm)

Float Blades
Float Blades are made from an abrasive resistant steel. This is a wide blade, with al edges turned up. This blade is used flat. To use float blades, a finisher will wait only until the concrete is hard enough to support his weight. The blades are used in a flat positoin and their function is to pack the surface aggregate into the slab and force the water to the top. These blades can be reversed.

Finishing Blades
Finish Blades are made of a quality spring steel. These are narrow, 6 inch wide blades. The length varies according to the diameter of the machine on which they are to be used. All finish blades are reversible (can be turned end for end). This blade is used when the concrete has begun to set. The blades are tilted from 3 degrees to 5 degrees and usually used at full speed. They make the concrete surface hard and glossy.

-Heavy Duty Trowel Blades
-Gold type(Chrome coating)
-Blue type

Combination Blades
Reversible Combination Blades

Combination Blades
Combination Blades will do both floating and finishing operations. This blade is not reversible. The combination blade has three (3) edges turned which allows it to be used flat in the floating position and tilted in the finish position.

Plastic Blades for longer services and not spots on the color surfaces.